Rules ...
I confirm that the uploaded data and files do not violate any rights or copyrights. I know that my ip is saved and that it can be prosecuted. I also respect the copyrights of the downloaded data. I agree to these provisions.

  • Info • Name
    Beschreibung
    Größe
    Klicks aktuell
    Alle Klicks
  •  CHIRP - programming your amateur radio (open-source)   2020-14-10 
    von admin »
    CHIRP is a free, open-source tool for programming your amateur radio. It supports a large number of manufacturers and models, as well as provides a way to interface with multiple data sources and formats.

    A trap for young players with the 817 and chirp. You need to do two steps to get the radio to talk to the computer

    Set CHIRP up to download the radio image form the menu, then on the radio, press button “A” and the radio will start TX’ing data, and you have a copy of the radio memories. Program up the radio in chirp with your repeaters and other parameter settings and save a copy. To load the new memories/file into the radio, power on the radio as per above and enter “CLONE MODE” again, Set CHIRP to upload to radio and then press the “C” button on the Radio, the device will change to RX mode and receive the new configuration. The instructions are on page 69 of the 817nd (2011) manual under Cloning.
    11.64 MiB
    0 • 6
     (1)
  •  WideBand Info for the FT-817, FT-897 and the FT-857   4.0 
    von admin »
    ///WideBand Info for the FT-817, FT-897 and the FT-857
    There are some free programs available that work to open up the transmit range of the FT-817. I tested this on the radio to confirm that widebanding does work. I used the Windows program WideBander v4.

    Widebanding the in this way makes no Permanent changes to the radio. To set it back to the factory band plan you can do a full reset or run Widebander and press the button to put your radio back to standard. It just that simple and it really works. You can also use Widebander on the FT-857 and FT-897..

    A CD will be included with this and other program. Just run the program, using the Computer interface cable. No need to open the radio, just run the software on your computer. This also means you can easily reset the radio back to the factory default. This will give you the 60m US 5 Mhz. channels plus MARS coverage and more.
    6.83 KiB
    0 • 2
     (1)
  •  FT-817 Commander by Simon Brown, HB9DRV   2.2 beta (build739) 
    von admin »
    FT-817 Commander by Simon Brown, HB9DRV
    2.82 MiB
    0 • 2
     (1)
  •  FTBasicMMO - memory management for Yaesu transceivers   1.3.7 
    von admin »
    FTBasicMMO - memory management for Yaesu transceivers / FT-817, FT-818, FT-847, FT-857, FT-897 including ND and D models. FTBasicMMO V1.3.7 Full install package with setup program.
    2.64 MiB
    0 • 5
     (1)



Gesamtübersicht  Download Statistiken